|
3 IN 2,4 OUT MULTI-SWITCH WITH PASSIVE ANT.
INPUT
Features:
◆ 2 LNB+1 TV inputs to 4 outputs for
4 satellite receivers
◆ Matrix routes between any inputs to
any outputs
◆ Territorial TV signal can be
combined and conveyed by single coaxial cable
◆ Inputs selected by 14/18V from
satellite RXs
◆ Built-in I.F. amplification circuit
compensates insertion loss
◆ MS-34A has a DC input jack, with
accepts an external DC power for
◆ multi-switch and LNBs poeration(AC/DC
adaptor 16Vdc,500mA is optional)
◆ 500 mA power passing from RX to
LNB |
MS34
Specs |
3 IN 8 OUT MULTI-SWITCH WITH PASSIVE ANT.
INPUT
Features:
◆
2 LNB+1 TV inputs to 8 outputs for 8 satellite
receivers
◆
Matrix
routes between any inputs to any outputs
◆
Territorial
TV signal can be combined and conveyed by single coaxial
cable
◆
Inputs
selected by 14/18V from satellite RXs
◆
Built-in
I.F. amplification circuit compensates insertion
loss
◆
500
mA power passing from RX to
LNB |
MS38
Specs |
2 IN 12 & 16 OUT
MULTI-SWITCH
Features:
◆
2
LNB inputs to multiple outputs
◆
MS-12 for 12
receivers, MS-16 for receivers
◆
Matrix
routes between any inputs to any outputs
◆
Inputs
selected by 14V/18V from satellite RXs
◆
Built-in
I.F. amplification circuit compensates
◆
insertion
loss
◆
500mA
power passing from RX to LNB |
MS12
Specs |
|
MS16
Specs |
22KHz DUAL SATELLITE MULTI-SWITCH
The MS-54
has 5 inputs to 4 outputs. The MS-58
is a 5 inputs to 8
outputs. These are 22KHz Control Multiswitchs with DC Power
Supply. They are designed to allow the reception of satellites
from two or three orbital slots using multiple LNBs in a
residential application. A 600mV,22KHz quasi square wave is
placed on top of the 13/18VDC when the additional satellite
feeds are required. These devices enable the reception of
DirecTV Para Todos and HDTV feeds in a multi LNB environment.
|
MS54
Specs |
|
MS58
Specs |
2 IN 1 OUT MULTI-SWITCH
Features:
◆
2
I.F. inputs to 1 I.F. output controlled by-
◆
722D: 14V/18 Vdc voltage through coaxial
cable
◆
GS22: 0/22 KHz tone signal through coaxial
cable
◆
Mostly
used for V/H selection in dual output LNB
system
◆
500 mA max. DC power passing from RX to
LNB |
722D
Specs |
